Injection mould machine English | 中文
Products Category
Contact Us

Name: Haijiang Sales Team
Tel: +86-574-87994054
Fax: +86-574-56877329
Mobile: +86-18658255281
Add: 707,Minghui Dasha 666#,Jinyulu,Yinzhou area, Ningbo city,China
Skype: haiflymachinery
QQ: 2692648818
SKYPE: haiflymachinery QQ: 2692648818

Extrusion blow molding machine operation Manual

Author:HaiflyMachinery Date:2012-5-27 22:55:52

Extrusion blow molding machine operation Manual

The Extrusion blow molding machine installation includes two steps:first the main machine,such as frame,extrusion system,die and hydraulic system installtion.Second step,the other parts,such as hydraulic lines,pneumatic lines,electricity and control lines etc.

Main blow molding machine installation,
1.frame and hydraulic system installation
2.Extrusion system,baluster installtion etc.
3.Die instation
   Suspending the die in front of the extrustion part by crane.Then screw the screw of the die to fix up the die and make sure the die should be horizontal and the middle of die should be on the same line with the middle of screw of the machine. After all ,fix up all the screws,to make sure the die is steady.

Other parts installation

1.Hydraulic system
2.Pneumatic system
3.Cooling system
4.Electricity control system,make sure the machine should be ground connection.
5.Filling the hydraulic oil
6.Open the air filter on the oil box,then fill the hydraulic oil.the oil level sould as full as the oil box shows. and also the hydraulic oil should be filtered first.